(1)    These Regulations may be cited as the Building (Amendment) Regulations 2011.

(2)    These Regulations shall come into force on 15th July 2011.

(3)    In these Regulations—

“the 2007 Regulations” means the Energy Performance of Buildings (Certificates and Inspections) (England and Wales) Regulations 2007;

“the 2010 Regulations” means the Building Regulations 2010.

Regulation 9 of the 2007 Regulations 2007 is amended as follows—

(a)    in paragraph (1)(a), for “9” substitute “21”;

(b)    omit paragraphs (1)(b) to (1)(d).

(1)    The 2010 Regulations are amended as follows.

(2)    In regulation 2 (1) (interpretation)—

(a)    in the definition of “energy efficiency requirements”, for “and 29”, substitute “, 29 and 40”;

(b)    in the definition of “renovation”, after “the provision of a new layer in the thermal element”, add “(other than where that new layer is provided solely as a means of repair to a flat roof)”.

(3)    In regulation 6(1)(a) (requirements relating to material change of use), omit “G2 (bathrooms)”.

(4)    In regulation 49 (transitional provisions: interpretation), omit the definition of “the 2010 Regulations”.

(5)    In Schedule 3 (self-certification schemes and exemptions from requirement to give building notice or deposit full plans)—

(a)    in column 2, paragraph 7 after “Ascertiva Group Limited” insert “Association of Plumbing and Heating Contractors (Certification) Limited”;

(b)    in column 2, paragraph 11—

(i)    after “ECA Certification Limited” omit “or” and insert “,”,

(ii)    after “NAPIT Registration Limited” insert “, Oil Firing Technical Association Limited or Stroma Certification Limited”;

(c)    in column 2, paragraph 12—

(i)    after “NAPIT Registration Limited” omit “or” and insert “,”;

(ii)    after “Oil Firing Technical Association Limited” insert “or Stroma Certification Limited”.

(d)    add the following paragraph—

(6)    In paragraph 1(f) of Schedule 4 (descriptions of work where no building notice or deposit of full plans required) for “resting” substitute “testing”.

Signed by authority of the Secretary of State

Andrew Stunell

Parliamentary Under Secretary of State

Department for Communities and Local Government

15th June 2011

These Regulations amend the Energy Performance of Buildings (Certificates and Inspections) (England and Wales) Regulations 2007 (“the 2007 Regulations”) and the Building Regulations 2010 (“the 2010 Regulations”).

Regulation 2 corrects a minor error in the amendments made by the Building Regulations 2010 to paragraph (1) of regulation 9 of the 2007 Regulations, and removes provisions in that regulation which are now redundant.

Regulation 3(2)(a) and (b) amend definitions in regulation 2 (interpretation) of the 2010 Regulations. The definition of “energy efficiency requirements” is amended to correct an error made in the 2010 Regulations. The definition of “renovation” is amended to make clear that adding a new layer by way of repair to a flat roof does not constitute renovation for the purposes of the 2010 Regulations.

Regulation 3(3), (4) and (6) correct minor errors in regulation 6(1)(a) (requirements relating to material change of use), regulation 49 (transitional provisions: interpretation), and in Schedule 4 paragraph 1(f).

Regulation 3(5) adds a new paragraph to the list in Schedule 3 of work that is exempt from the requirement to give a building notice or to deposit full plans when carried out by persons specified in that Schedule, and adds to those bodies in paragraphs 7, 11 and 12 which are able to register persons for the purposes of self certification schemes.

A full impact assessment of the effect that this instrument will have on the costs of business and the voluntary sector is published with the Explanatory Memorandum alongside the instrument on www.legislation.gov.uk, and shows a net benefit to business in relation to the amendments made to Schedule 3.